Address

BeCu finger strips can be used for closing a gap between two surface and provide the high EMI shielding effectiveness in enclosure applications where extremely low closure forces are required.

Closed cell conductive EPDM Rubber Sponge

-EMI/RFI Shielding

- Can be used as grounding applications

- Conduct electrons throughout the material

- Pressure Sealing at low pressure

- Most Economical material compare with silver coated elastomers

- Temperature Stability between -40°C to 125°C

- Nuclear Bio Chem Resistance

- Salt Fog Resistance

Applications:

Electronic devices, Cable box, Satellite Box, Cellphone, Network Routers, Semiconductor, Gaskets, Computer Enclosures, Hand Held Devices, Medical Diagnostic, and Analytical Equipment, Aerospace & Automotive, Electronic Systems.

EPDM Rubber SpongeSPECIFICATION DATA
	Specification	Typical Value
Compression at 25% deflection (kPa):	35-65	49
Compression deflection at 50% (kPa):	80-160	112
Density (kg/m³):	120+/-20	134
Compression set (50% 22H 20°C):	25% Max.	14.1%
Water Absorption, max. change in weight (%):	10	0.6
Heat ageing, change in compression deflection, 22hrs at 100°C:	+/-30%	PASS
Flammability:	FMVSS-302	PASS
Elongation at break (%):	N/A	180
Tensile strength (kN/m²):	N/A	>500
Temperature range (low-high):	N/A	-40 to +70°C
High intermittent:	N/A	+100°C
Resistance to Air and UV:	EXCELLENT
Resistance to Oil:	POOR
Resistance to Acids:	GOOD
Environmental Protection:	CFC AND HFC FREE CAN BE RECYCLED

Previous: Conductive silicone gasket

Next: Beryllium copper gasket

Address

Tel

0086-531-81901321

Email

EMI

ABOUT US

PRODUCTS

CONTACT US

EMI

MESSAGE

RECOMMEND PRODUCTS